01
Polyester resins; unsaturated polyester resins; polyurethane
resins; unprocessed artificial and synthetic resins;
silicates; silicate resins; hardeners for grout; hardeners
for concrete; hardeners for cement; hardeners for artificial
and synthetic resins; activators (chemicals); wetting agents
for preventing the adhesion of clay; polymers for cleaning
drilling fluids; bentonite, in particular for imparting
viscosity, fluid loss control and gelling characteristics to
drilling fluids; viscosifiers made of sodium bentonite for
drilling fluids; galvanizing compounds; surface coating
compositions (chemicals), other than paints; chemicals for
preventing corrosion; liquid coatings (chemical); chemical
additives for grout and cement; adhesives for industrial
use; curing preparations (chemical preparations for use in
industry); cooling preparations (terms considered too vague
by the International Bureau - rule 13 (2) (b) of the Common
Regulations); hydraulic fluids; chemical releasing agents;
putties, fillers and pastes for use in industry (terms
considered too vague by the International Bureau - rule 13
(2) (b) of the Common Regulations); chemical substances,
chemical materials and chemical preparations
06
Ironmongery; metal hardware; building and construction
materials and elements of metal; reinforcement materials and
elements of metal; anchoring materials and elements of
metal; tensioning materials and elements of metal; goods of
metal, namely rods, tie rods, poles, girders, lattice
girders, bars, reinforcing bars, tensioning bars, ribbed
bars, threaded bars, tendons, nuts, threaded nuts, hex nuts,
support nuts, anchor nuts, eye nuts, bolts, rock bolts,
expansion bolts, extension bolts, anchor bolts, cable bolts,
strand bolts, friction bolts, mixing bolts, eyebolts,
support bolts, connection bolts, pins [hardware], fasteners,
screws, set screws, sleeves and shims; goods of metal,
namely pipes, tubes, drainage tubes, air tubes, cladding
tubes, hoses, cables, ropes, strands, wires, litz wire,
tension wire, fibres, piles, pillars, steel ribs, profiles,
anchors, ground anchors, bar anchors, wedge anchors for
bolts and cables, anchor heads, anchor supports, strips,
plates, support plates, bearing plates, anchor plates, foot
plates, liner plates, pressure plates, discs, sheets,
reinforcement sheets and forepoling sheets; goods of metal,
namely clips, retainer clips, clips for fastening cables and
wires on anchors, valves (other than parts of machines),
non-return valves of plastic (other than parts of machines),
thrust blocks, anchoring blocks, spacers, pipe spacers,
cotters, lids, flanges, washers, rings (other than jewelry),
power transmission rings, nails, nail heads, expansion
shells, dowels, shell plugs for resin installation, holders
for cables and cable bolts, straps and hooks; goods of
metal, namely cable grips, drive-heads for cable bolts,
cartridges for resins, cartridges for cement, wire mesh,
meshes of common metal, formed meshes of common metal,
panels, walls, fire protection panels, structures,
ventilation channels, cable channels (non-electric) and
hangers (not part of machines and not for clothes); goods of
metal, namely brackets, mounting brackets, wrench holders,
ladders, supports, adjustable supports, beams, arches,
joints for supports, posts, plugs for sealing drill holes,
gripping wedges for cables, roof trusses, ceiling trusses
and stays; connectors and couplings of metal for rods,
poles, bars, bolts, screws, threaded bars, reinforcing bars,
pipes, tubes, hoses, cables, ropes, strands, wires, walls
and tunnel segments; portable buildings of metal; sliding
mouldings and climbing forms and armaments of metal (terms
considered too vague by the International Bureau - rule 13
(2) (b) of the Common Regulations); parts and fittings for
all the aforesaid goods, included in this class
07
Mechanical equipment for structural and civil engineering,
construction, mining, tunneling, earthmoving, rock
stabilization and soil stabilization; motors and engines
(except for land vehicles); pumps, compressors and
generators; air pumps; water pumps; vacuum pumps; hydraulic
pumps; electric pumps; grout pumps; lifting and hoisting
equipment; machine coupling and power transmission
components (except for land vehicles); construction
machines; concrete construction machines; earthmoving
machines; mining machines; tunneling machines; soil
stabilization machines; rock stabilization machines;
crushing machines; feeding machines; spraying machines;
mixing machines; grout mixing machines; mechanical,
pneumatic, hydraulic and electric implements (other than
hand-operated) for structural and civil engineering,
construction, mining, tunneling, earthmoving, rock
stabilization and soil stabilization; conveyors; winches;
mechanical apparatus and machine-like tools for structural
and civil engineering, construction, earthmoving, mining,
rock stabilization, soil stabilization and tunneling;
mechanical and hydraulic presses; pressing machines;
machines for straightening and bending steel rods; machines
for cutting or rolling of threads on reinforcing elements;
mechanical apparatus for processing, installing, binding and
anchoring of rod-shaped supporting elements, in particular
cutting and bending devices, apparatus for insertion of rods
and strands and screwing devices; mechanical apparatus for
tensioning of pre-stressing elements, in particular
hydraulic jacks; mechanical apparatus for treating and
injecting settable and anticorrosive materials; mechanical
apparatus and machines for injecting synthetic and
artificial resins; electric, hydraulic and pneumatic tools
for injecting synthetic and artificial resins; machines and
apparatus for underground pipe laying operations involving
ground displacement or removal; horizontal drilling
equipment and horizontal shield driving equipment for
walk-in and non-walk-in pipelines; machines and
machine-driven devices for the manufacturing of precast
concrete parts; power tools; mechanical tools (other than
hand-operated); hydraulic tools; pneumatic tools (other than
hand-operated); socket spanners (machines); torque spanners
(machines); electric, hydraulic and pneumatic tools for
tensioning cables and cable bolts; electric, hydraulic and
pneumatic tools for installing cables and cable bolts;
electric, hydraulic and pneumatic tools for installing
metallic and non-metallic bars; electric, hydraulic and
pneumatic tools for installing metallic and non-metallic
bolts; machines for feeding, connecting and installation of
tubes and drill rods; electric, hydraulic and pneumatic
tools for feeding, connecting and installation of tubes and
drill rods; electric, hydraulic and pneumatic tools for
installing plates and wedges for cables and cable bolts;
electric, hydraulic and pneumatic tools for injecting grout
into hollow bars; drilling machines; drills (power tools);
drilling rods; jacks (machines); electric, pneumatic and
hydraulic jacks; hydraulic rams; wrenches (machines); torque
wrenches (machines); hydraulic machines for spraying dust;
valves (included in this class) (terms considered too vague
by the International Bureau - rule 13 (2) (b) of the Common
Regulations); non-return valves (parts of machines); plugs
for grout pumps and grout mixing machines; gripping devices
and wedges for electric, hydraulic and pneumatic tools for
tensioning cables and cable bolts; bits and rods for
drilling machines; adaptors for bits and rods for drilling
machines; bits and rods for drills (power tools); adaptors
for bits and rods for drills (power tools); adaptors for
socket spanners (machines); adaptors for torque spanners
(machines); tubes being fitted parts of machines; hydraulic
and pneumatic controls for machines, motors and engines;
parts and fittings for all the aforesaid goods, included in
this class
08
Hand tools and implements (hand-operated); hand-operated
appliances for use in structural and civil engineering,
construction, mining, tunneling, earthmoving, rock
stabilization and soil stabilization, in particular for
processing, installing, anchoring and binding rod-shaped
supporting elements, such as cutting and bending appliances,
apparatus for insertion of rods and screwing appliances
(terms considered too vague by the International Bureau -
rule 13 (2) (b) of the Common Regulations); hand-operated
appliances for tensioning of pre-stressing elements (terms
considered too vague by the International Bureau - rule 13
(2) (b) of the Common Regulations); hand-operated appliances
for treating and injecting settable and/or anti-corrosive
materials (terms considered too vague by the International
Bureau - rule 13 (2) (b) of the Common Regulations); hand
tools for installing anchors, in particular chemical
anchors; hand tools for installing metallic and non-metallic
bars; hand tools for installing metallic and non-metallic
bolts; hand-operated tools for the installation of bolts, in
particular, square drivers, T-thread drivers, rope thread
drivers, square nutrunners, hex nutrunners, T-thread
nutrunners, rope thread nutrunners, hex shanks and hex
sockets; hand pumps, in particular air pumps and water
pumps; rams (hand tools); hand tools for tensioning cables
and cable bolts; hand tools for installing cables and cable
bolts; hand tools for installing plates and wedges for
cables and cable bolts; hand-tools, namely, spinners and
nutrunners for threaded bars; wrenches (hand tools); torque
wrenches; hand drills; bits and rods for hand drills;
adaptors for bits and rods for hand drills; hand tools for
injecting grout into hollow bars; hand-operated chisels;
picks (hand tools); T-thread drivers (hand tools); nut
runners (hand tools); nut drivers (hand tools); bit drivers
for hand tools; screwdrivers; cutters; scaling bars (hand
tools), in particular for scaling down loose rocks;
spanners; adaptors for spanners; parts and fittings for all
the aforesaid goods, included in this class
09
Electronic control apparatus, units and systems; apparatus
and instruments for conducting, switching, transforming,
accumulating, regulating or controlling electricity;
electrical switch cabinets; apparatus and instruments for
capturing, recording, transmission, reception or
reproduction of sound, images or data; data processing
equipment; computer software and hardware; computer
peripherals; recorded data; safety, security, protection and
signalling devices and equipment; measuring, detecting and
monitoring instruments, devices, appliances and controllers;
pressure meters; flow meters; testing and quality control
devices; sensors; remote control apparatus; cables and wires
(electricity); protective and safety clothing for protection
against accident or injury; protective shoes; protective
helmets; eyeglasses, in particular safety glasses for
protecting the eyes and sun glasses; optical, electric and
electronic apparatus for use in structural and civil
engineering, construction, mining, tunneling, earthmoving,
rock stabilization and soil stabilization, in particular for
measuring and registering distances, angles, heights and
positions; apparatus for measuring and/or monitoring tension
forces by optical, electric or electronic means; gauges;
pneumatic and hydraulic apparatus for testing bolts, bars
and nails; electric cable channels; folding rulers; safety
contact plugs; parts and fittings for all the aforesaid
goods, included in this class
17
Seals, sealants and fillers; O-rings; textile seals and
sealing material; non-metallic plugs for sealing drill
holes; synthetic polymer seals; sealing washers of rubber;
rubber gaskets; insulation, damping and barrier materials;
shock-absorbing and packing materials; flexible pipes,
tubes, hoses, and fittings therefor, including valves;
non-metallic pipes, tubes and hoses (not for building
purposes); non-metallic caps for tubes (not for building
purposes); non-metallic nozzles for pipes, tubes and hoses;
air hoses; non-metallic air tubes; non-metallic pipe
spacers; non-metallic cable spacers; non-metallic bolt
spacers; non-metallic connectors and couplings for pipes,
tubes, hoses; unsaturated polyester resins (semi-finished);
artificial and synthetic resins (semi-finished); resins for
sealing and waterproofing purposes; elastic yarns (not for
use in textiles); synthetic polymers for stabilizing
boreholes; valves of rubber; non-return valves of rubber
(other than parts of machines); synthetic fibres (other than
for textile use); waterproofing and moisture proofing
articles and materials; waterproof membranes made of
polymers; bentonite mats for sealing, barrier and
waterproofing purposes (terms considered too vague by the
International Bureau - rule 13 (2) (b) of the Common
Regulations); parts and fittings for all the aforesaid
goods, included in this class; laggings; non-metallic hoses;
semi-finished resins
19
Building and construction materials (not of metal);
materials (not of metal) for structural and civil
engineering, mining, tunnelling, earthmoving, rock
stabilization and soil stabilization (terms considered too
vague by the International Bureau - rule 13 (2) (b) of the
Common Regulations); sliding mouldings and climbing forms
and armaments of wood (terms considered too vague by the
International Bureau - rule 13 (2) (b) of the Common
Regulations); reinforcing elements of fibre composites for
concrete; tension elements of fibre composites for earth and
rock anchors; tensioning materials and elements not of
metal; anchoring elements, namely anchoring bolts of plastic
and resin anchors; cladding tubes of plastic; settable and
anti-corrosive materials for injection into construction
elements, namely mortars with an artificial resin and/or
cement base; non-metallic roof trusses; non-metallic ceiling
trusses; non-metallic reinforcing bars; goods for building,
construction, structural and civil engineering, mining,
tunnelling, earthmoving, rock stabilization and soil
stabilization, namely non-metallic reinforcement materials,
non-metallic anchoring elements, non-metallic sleeves for
anchoring elements, non-metallic caps for anchoring
elements, non-metallic panels and walls, burlap panels and
walls, mouldings, non-metallic grids and meshes, yarn grids
and meshes, polymer grids, non-metallic wires and fibres
(terms considered too vague by the International Bureau -
rule 13 (2) (b) of the Common Regulations); goods for
building, construction, structural and civil engineering,
mining, tunnelling, earthmoving, rock stabilization and soil
stabilization, namely non-metallic mats, non-metallic
plates, non-metallic support plates, non-metallic fire
protection panels, non-metallic girders, non-metallic
lattice girders, non-metallic rigid pipes and tubes,
non-metallic caps for rigid tubes, and finished resins
(terms considered too vague by the International Bureau -
rule 13 (2) (b) of the Common Regulations); non-metallic
drainage pipes; roof, ceiling and wall supports of concrete;
non-metallic pillars; grout; grouting compounds; cement;
cementitious compounds; concrete; mortar; clay; non-metallic
ventilation channels; non-metallic cable channels
(non-electric); non-metallic beams; wood beams; non-metallic
posts; non-metallic portable buildings; geotextiles; parts
and fittings for all the aforesaid goods, included in this
class; clay for sealing boreholes; non-metallic connectors
and couplings for walls and tunnel segments
20
Non-metallic bolts; non-metallic anchor bolts; non-metallic
expansion bolts; fiberglass bolts; non-metallic expansion
shells; non-metallic dowels; fiberglass dowels; non-metallic
nuts, in particular threaded nuts and support nuts;
non-metallic washers; non-metallic shell plugs for resin
installation; non-metallic anchors, in particular polyester
anchors; non-metallic bar anchors; non-metallic anchoring
devices; non-metallic sleeves for anchoring devices;
non-metallic caps for anchoring devices; non-metallic
screws, in particular set screws; non-metallic hooks;
non-metallic pins [pegs]; non-metallic cable grips; plastic
caps for cable grips; non-metallic drive-heads for cable
bolts; non-metallic wedge anchors for bolts and cables;
non-metallic cartridges for resins; non-metallic cartridges
for cement; non-metallic grids and meshes (not for building
purposes); polymer grids (not for building purposes); wire,
hose and pipe hangers (not of metal); non-metallic hangers
for grids, meshes and non-electric screens; non-metallic
mounting brackets; non-metallic ladders; non-metallic
moveable steps; non-metallic valves; non-return valves of
plastic (other than parts of machines); screwed rods (not of
metal); non-metallic poles; non-metallic fasteners;
non-metallic shims; plastic clips; non-metallic nails;
non-metallic holders for cables and cable bolts; parts and
fittings for all the aforesaid goods, included in this
class; non-metallic connectors and couplings for rods,
poles, bars, bolts, screws, threaded bars, reinforcing bars,
cables, ropes, strands, wires
37
Construction services; construction consultancy; mining
services; mining consultancy; tunneling; tunneling
consultancy; earthmoving services; earthmoving consultancy;
demolition; excavation; bridge construction; constructing
permanent ways for railways; earthworks; road and path
building and building ways for rail-borne vehicles; tunnel
and mining gallery construction; construction of pipelines
by subterranean pipe drive; water construction (terms
considered too vague by the International Bureau - rule 13
(2) (b) of the Common Regulations); site management for
third parties (terms considered too vague by the
International Bureau - rule 13 (2) (b) of the Common
Regulations); supervision of construction, mining,
tunnelling, earthmoving, rock stabilization and soil
stabilization; installation, repair and maintenance services
with respect to products of mechanical and electrical
engineering, products for structural engineering, civil
engineering, construction, mining, tunnelling, earthmoving,
rock stabilization and soil stabilization, and parts
thereof; supervision of installation of products of
mechanical and electrical engineering, products for
structural engineering, civil engineering, construction,
mining, tunnelling, earthmoving, rock stabilization and soil
stabilization, and parts thereof; installation, repair and
maintenance services with respect to industrial
installations, vehicles, apparatus and machines, and parts
thereof; installation, repair and maintenance services with
respect to buildings, roads, paths, bridges, tunnels and
mines, including control and support of buildings, roads,
paths, bridges, tunnels and mines; installation, repair and
maintenance services with respect to structures; inspection
of buildings, roads, paths, bridges, tunnels, mines and
structures in the course of building construction;
inspection of buildings, roads, paths, bridges, tunnels and
mines prior to maintenance and repair; inspection of
products of mechanical and electrical engineering, products
for structural engineering, civil engineering, construction,
mining, tunnelling, earthmoving, rock stabilization and soil
stabilization prior to maintenance and repair; inspection of
industrial installations, vehicles, apparatus and machines
prior to maintenance and repair; structural and civil
engineering, namely installing supporting elements in
construction works, in particular laying reinforcing rods
and pre-stressing elements, tensioning pre-stressing
elements as well as injecting settable and anti-corrosive
materials (terms considered too vague by the International
Bureau - rule 13 (2) (b) of the Common Regulations);
erecting sliding mouldings and climbing forms; erecting
buildings of reinforced concrete, in particular by using
sliding mouldings and climbing forms; installation of
subterraneous curtains and posts; fixing ground anchors and
rock anchors; mounting tension and compression piles, ground
and rock anchors as well as rock and ground spikes;
installation and assembly of bars, in particular on
suspension bridges and cable-stayed bridges; inspection and
maintenance and repair of domestic technique equipment;
installation and assembly of industrial plants; blasting
(terms considered too vague by the International Bureau -
rule 13 (2) (b) of the Common Regulations); maintaining
installations for purifying drinking water, service water
and waste water; rustproofing; anti-corrosion treatment;
hire, rental and leasing of goods associated with the
provision of all the aforesaid services, included in this
class; consultancy and information services relating to all
the aforesaid services, included in this class
42
Scientific and technological services and research;
industrial analysis and research services; technical project
planning; construction planning; technological planning
services; development, programming, installation,
implementation, updating, maintenance and repair of computer
software; development of computer hardware; computer
programming; IT consultancy, advisory and information
services; computer analysis and diagnostics (terms
considered too vague by the International Bureau - rule 13
(2) (b) of the Common Regulations); testing, authentication
and quality control; product safety testing; technical
testing services; testing of materials; services of a
technical testing laboratory; geological research and
prospecting; design services; product research and
development, in particular products for structural and civil
engineering, construction, mining, tunnelling, earthmoving,
rock stabilization and soil stabilization; development of
new products and technologies for third parties;
constructional planning and design; measurement services;
realisation of technical measuring (terms considered too
vague by the International Bureau - rule 13 (2) (b) of the
Common Regulations); preparation of technical surveys;
laboratory services (terms considered too vague by the
International Bureau - rule 13 (2) (b) of the Common
Regulations); technical development of usage concepts for
products for structural and civil engineering, construction,
mining, tunnelling, earthmoving, rock stabilization and soil
stabilization; technical project management (terms
considered too vague by the International Bureau - rule 13
(2) (b) of the Common Regulations); technical calculations
in the field of statics; architectural and construction
drafting and consultancy; technical consultancy and
providing of expertise (terms considered too vague by the
International Bureau - rule 13 (2) (b) of the Common
Regulations); technical supervision (terms considered too
vague by the International Bureau - rule 13 (2) (b) of the
Common Regulations) and inspection; architectural services;
engineering services; services of a constructing consultant,
namely project management and quality management in
structural and civil engineering; services of an engineer
for project management and project controlling; surveying,
especially in the course of constructing underground
chambers; quality management by engineers and architects;
scientific and technological research in the field of
material, structural and civil engineering, construction,
mining, tunnelling, earthmoving, rock stabilization and soil
stabilization; hire, rental and leasing of goods associated
with the provision of all the aforesaid services, included
in this class; consultancy and information services relating
to all the aforesaid services, included in this class